RESOLUTION MEPC.388(81)
(adopted on 22 March 2024)
AMENDMENTS TO THE 2022 GUIDELINES FOR THE DEVELOPMENT OF A SHIP
ENERGY EFFICIENCY MANAGEMENT PLAN (SEEMP) (RESOLUTION MEPC.346(78))
THE MARINE ENVIRONMENT PROTECTION COMMITTEE,
RECALLING Article 38(a) of the Convention on the International
Maritime Organization concerning the functions of the Marine Environment
Protection Committee conferred upon it by international conventions for the
prevention and control of marine pollution from ships,
NOTING that regulation 26 of MARPOL Annex VI requires each ship to
keep on board a Ship Energy Efficiency Management Plan (SEEMP), to be developed
and reviewed, taking into account the guidelines adopted by the Organization,
NOTING ALSO that, at its seventy-eighth session, it adopted, by
resolution MEPC.346(78),
the 2022 Guidelines for the development of a Ship Energy Efficiency
Management Plan (SEEMP),
HAVING CONSIDERED, at its eighty-first session, proposed
amendments to the 2022 Guidelines for the development of a Ship Energy
Efficiency Management Plan (SEEMP),
1 ADOPTS amendments
to the 2022 Guidelines for the development of a Ship Energy Efficiency
Management Plan (SEEMP), the text of which is set out in the annex to the present
resolution;
2 REQUESTS the
Parties to MARPOL Annex VI and other Member Governments to bring the annexed
amendments to the attention of masters, seafarers, shipowners, ship operators
and any other interested parties.
ANNEX
AMENDMENTS TO THE 2022 GUIDELINES FOR THE DEVELOPMENT OF A SHIP
ENERGY EFFICIENCY MANAGEMENT PLAN (SEEMP) (RESOLUTION MEPC.346(78))
1 A new paragraph
2.5 is added after paragraph 2.4, as follows:
"2.5 Consumer
type means a type of engine or set of engines, boiler, fuel cell or others
used for the same purpose."
2 Section 7 is
replaced by the following:
"7 GUIDANCE
ON METHODOLOGY FOR COLLECTING DATA ON FUEL OIL CONSUMPTION, DISTANCE TRAVELLED
AND HOURS UNDER WAY AND OTHER ITEMS
Total annual fuel oil1 consumption
__________________
1 Regulation 2.1.14 of
MARPOL Annex VI defines "fuel oil" as any fuel delivered to and
intended for combustion purposes for propulsion or operation on board a ship,
including gas, distillate and residual fuels.
7.1 Fuel oil consumption
should include all the fuel oil consumed on board including but not limited to
the fuel oil consumed by the main engines, auxiliary engines, gas turbines,
boilers and inert gas generator, for each type of fuel oil consumed, regardless
of whether a ship is under way or not. Methods for collecting data on annual
fuel oil consumption in metric tonnes include (in no particular order):
.1 method using bunker
delivery notes (BDNs):
This
method determines the annual total amount of fuel oil used based on BDNs, which
are required for fuel oil for combustion purposes delivered to and used on
board a ship in accordance with regulation 18 of MARPOL Annex VI; BDNs are
required to be retained on board for three years after the fuel oil has been
delivered. The Data Collection Plan should set out how the ship will
operationalize the summation of BDN information and conduct tank readings. The
main components of this approach are as follows:
.1 annual fuel oil
consumption would be the total mass of fuel oil used on board the vessel as
reflected in the BDNs. In this method, the BDN fuel oil quantities would be
used to determine the annual total mass of fuel oil consumption, plus the
amount of fuel oil left over from the last calendar year period and less the amount
of fuel oil carried over to the next calendar year period;
.2 to determine the
difference between the amount of remaining tank oil before and after the
period, the tank reading should be carried out at the beginning and the end of
the period;
.3 in the case of a
voyage that extends across the data reporting period, the tank reading should
occur by tank monitoring at the ports of departure and arrival of the voyage
and by statistical methods, such as rolling average using voyage days;
.4 fuel oil tank
readings should be carried out by appropriate methods such as automated
systems, soundings and dip tapes. The method for tank readings should be
specified in the Data Collection Plan;
.5 the amount of any
fuel oil offloaded should be subtracted from the fuel oil consumption of that
reporting period. This amount should be based on the records of the ship's oil
record book; and
.6 any supplemental
data used for closing identified difference in bunker quantity should be
supported with documentary evidence;
.2 method using flow
meters:
This
method determines the annual total amount of fuel oil consumption by measuring
fuel oil flows on board by using flow meters. In case of the breakdown of flow
meters, manual tank readings or other alternative methods will be conducted
instead. The Data Collection Plan should set out information about the ship's
flow meters and how the data will be collected and summarized, as well as how
necessary tank readings should be conducted, as follows:
.1 annual fuel oil
consumption may be the sum of daily fuel oil consumption data of all relevant
fuel oil consuming processes on board measured by flow meters;
.2 the flow meters
applied to monitoring should be located so as to measure all fuel oil
consumption on board. The flow meters and their link to specific fuel oil
consumers should be described in the Data Collection Plan;
.3 note that it should
not be necessary to correct this fuel oil measurement method for sludge if the
flow meter is installed after the daily tank as sludge will be removed from the
fuel oil prior to the daily tank;
.4 the flow meters
applied to monitoring fuel oil flow should be identified in the Data Collection
Plan. Any consumer not monitored with a flow meter should be clearly
identified, and an alternative fuel oil consumption measurement method should
be included; and
.5 calibration of the
flow meters should be specified. Calibration and maintenance records should be
available on board;
.3 method using bunker
fuel oil tank monitoring on board:
.1 to determine the
annual fuel oil consumption, the amount of daily fuel oil consumption data
measured by tank readings which are carried out by appropriate methods such as
automated systems, soundings and dip tapes will be aggregated. The tank
readings will normally occur daily when the ship is at sea and each time the
ship is bunkering or de-bunkering; and
.2 the summary of
monitoring data containing records of measured fuel oil consumption should be
available on board;
.4 method using LNG
cargo tank monitoring on board:
LNG
ships use the Custody Transfer Monitoring System (CTMS) to monitor/record the
cargo volumes inside the tanks. When calculating the consumption:
.1 the LNG liquid
volume consumed is converted to mass using the methane density of 422 kg/m3.
This is because LNG is transported at methane boiling point, while other
heavier hydrocarbons have a higher boiling point and remain at liquid state;
and
.2 nitrogen mass
content is subtracted for each laden voyage from LNG consumption as it does not
contribute to CO2 emissions;
.5 method using cargo
tank monitoring on board for ships using cargo other than LNG as a fuel:
.1 to determine the
annual fuel oil consumption, the amount of daily fuel oil consumption data
measured by tank readings which are carried out by appropriate methods to the
cargo used as a fuel. The method for tank readings should be specified in the
SEEMP Data Collection Plan; and
.2 the tank readings
will normally occur daily when the ship is at sea and each time the ship is
loading or discharging cargo; and the summary of monitoring data containing
records of measured fuel oil consumption should be available on board.
7.2 Any corrections,
e.g. density, temperature, nitrogen content for LNG, if applied, should be
documented.2
__________________
2 For example, ISO 8217
provides a method for liquid fuel.
Fuel oil consumption per consumer type
7.3 For the collection
of fuel oil consumption per consumer type (main engines, auxiliaries, boilers
and others), the methods can include:
.1 method using flow
meters:
This
method determines the annual fuel oil consumption by measuring fuel oil flows
on board by using flow meters. In case of the breakdown of flow meters, manual
tank readings or other alternative methods will be conducted instead. The Data
Collection Plan should set out information about the ship's flow meters and how
the data will be collected and summarized, as well as how necessary tank
readings should be conducted, as follows:
.1 annual fuel oil
consumption may be the sum of daily fuel oil consumption data of each consumer
type on board measured by flow meters;
.2 the flow meters
applied to monitoring should be located so as to measure all fuel oil consumption
for each consumer type;
.3 note that it should
not be necessary to correct this fuel oil measurement method for sludge if the
flow meter is installed after the daily tank as sludge will be removed from the
fuel oil prior to the daily tank;
.4 the flow meters
applied to monitoring fuel oil flow and their link to specific fuel consumer
types should be identified in the Data Collection Plan. Any individual consumer
of a consumer type not monitored with a flow meter should be clearly
identified, and an alternative fuel oil consumption measurement method should
be included; and
.5 calibration of the
flow meters should be specified. Calibration and maintenance records should be
available on board;
.2 method using bunker
fuel oil tank monitoring on board:
.1 to determine the
annual fuel oil consumption of each consumer type, the amount of daily fuel oil
consumption data measured by tank readings which are carried out by appropriate
methods such as automated systems, soundings and dip tapes will be aggregated.
The tank readings will normally occur daily when the ship is at sea and each
time the ship is bunkering or de-bunkering; and
.2 the summary of
monitoring data containing records of measured fuel oil consumption should be
available on board;
7.4 If there is a
consumer type whose fuel oil consumption cannot be determined directly
according to one of the methods indicated in paragraphs 7.3.1 and 7.3.2, the
annual fuel oil consumption of that consumer type should be determined according
to one of the following methods. The method used to determine the annual fuel
oil consumption of each consumer type should be described in detail in the Data
Collection Plan. Note that each consumer type may use a different method to
measure fuel oil consumption.
.1 method using
subtraction:
If
the fuel consumption for only one of the consumer types is not available, the
fuel consumption of this consumer type may be derived by subtracting the fuel
consumption of the other consumer types from the total annual fuel oil
consumption measured in paragraph 7.1; and
.2 method using
estimated fuel oil consumption:
In
cases where none of the above methods in paragraphs 7.3.1, 7.3.2 and 7.4.1 can
be applied, an alternative method that is to the satisfaction of the
Administration or any organization recognized by it may be used to estimate the
annual fuel oil consumption of the consumer type, based for example on
manufacturer data or actual historic fuel consumption for a specified period.
Conversion factor CF
7.5 If fuel oils are
used that do not fall into one of the categories as described in the 2022
Guidelines on the method of calculation of the attained Energy Efficiency
Design Index (EEDI) for new ships (resolution MEPC.364(79)), and have no CF-factor
assigned (e.g. some "hybrid fuel oils"), the fuel oil supplier should
provide a CF-factor for the respective product supported by
documentary evidence.
Distance travelled
7.6 Appendix IX of
MARPOL Annex VI specifies that distance travelled should be submitted to the
Administration and:
.1 distance travelled
over ground in nautical miles should be recorded in the logbook in accordance
with SOLAS regulation V/28.1;3
__________________
3 Distance travelled measured
using satellite data is distance travelled over the ground.
.2 the distance
travelled while the ship is under way under its own propulsion should be
included in the aggregated data of distance travelled for the calendar year;
and
.3 other methods to
measure distance travelled accepted by the Administration may be applied. In
any case, the method applied should be described in detail in the Data
Collection Plan.
7.7 Laden distance
should be calculated as the distance sailed when the ship is loaded.
Hours under way
7.8 Appendix IX of
MARPOL Annex VI specifies that hours under way should be submitted to the
Administration. Hours under way should be an aggregated duration while the ship
is under way under its own propulsion.
Data quality
7.9 The Data Collection
Plan should include data quality control measures which should be incorporated
into the existing safety management system. Additional measures to be
considered could include:
.1 the procedure for
identification of data gaps and correction thereof; and
.2 the procedure to
address data gaps if monitoring data is missing, for example, flow meter
malfunctions.
Total amount of onshore power supplied
7.10 Total amount of
onshore power supplied should be calculated as the sum of amount of onshore
power supplied in kWh. The amount of onshore power supplied should be recorded
based on relevant document by power supplier. The document should be stored.
This information as shown on the bill from the port or electricity provider
could be included in the electronic record.
Total transport work
7.11 Total transport work
is the annual sum of each voyage's transport work which is distance sailed
multiplied by cargo carried during a voyage. Relevant transport work metrics per
ship types are provided in Table 1 below.
Table 1: Transport work to be reported per ship type
|
Ship type |
Transport work metric |
|
bulk carriers, tankers, combination carriers, gas carriers, LNG
carriers, general cargo ships, ro-ro cargo ships (vehicle carriers), ro-ro
cargo ships |
∑𝑣 (𝑐𝑎𝑟𝑔𝑜_𝑚𝑎𝑠𝑠𝑣 · 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒𝑣) |