Revoked by MEPC.391(81)
RESOLUTION MEPC.376(80)
(adopted on 7 July 2023)
GUIDELINES ON LIFE CYCLE GHG INTENSITY OF MARINE FUELS (LCA
GUIDELINES)
THE MARINE ENVIRONMENT PROTECTION COMMITTEE,
RECALLING Article 38(a) of the Convention on the International
Maritime Organization (the Committee) concerning the functions of the Marine
Environment Protection Committee conferred upon it by international conventions
for the prevention and control of marine pollution from ships,
RECALLING ALSO that at its seventy-second session, the Committee
adopted resolution MEPC.304(72)
on Initial IMO Strategy on Reduction of GHG Emissions from Ships (Initial
Strategy),
NOTING that the Initial Strategy calls for the development of
robust life cycle GHG/carbon intensity guidelines for all types of fuels, in
order to prepare for an implementation programme for effective uptake of
alternative low-carbon and zero-carbon fuels,
NOTING ALSO that at its eightieth session, the Committee adopted
resolution MEPC.377(80)
on the 2023 IMO Strategy on Reduction of GHG Emissions from Ships (2023
IMO Strategy) setting out the levels of ambition for the international shipping
sector in reducing GHG emissions,
NOTING FURTHER that the 2023 IMO Strategy provides that the levels
of ambition and indicative checkpoints should take into account the
well-to-wake GHG emissions of marine fuels as addressed in the guidelines on
life cycle GHG intensity of marine fuels developed by the Organization,
NOTING that the 2023 IMO Strategy provides that the basket of
candidate mid-term GHG reduction measures should take into account the
well-to-wake GHG emissions of marine fuels as addressed in the guidelines on
life cycle GHG intensity of marine fuels developed by the Organization,
HAVING CONSIDERED, at its eightieth session, the draft guidelines
on life cycle GHG intensity of marine fuels (LCA Guidelines),
1 ADOPTS the Guidelines
on life cycle GHG intensity of marine fuels (LCA Guidelines), as set out in
the annex to the present resolution;
2 AGREES that any
regulatory application and implications of the LCA Guidelines should be
determined by the Committee in the process of developing regulatory provisions,
3 REQUESTS Member
Governments to bring the annexed Guidelines to the attention of shipowners,
ship operators, shipbuilders, ship designers, energy companies, fuel producers,
bunkering companies, engine manufacturers and any other interested parties;
4 AGREES to keep
these Guidelines under review in light of experience gained with their
implementation.
ANNEX
GUIDELINES ON LIFE CYCLE GHG INTENSITY OF MARINE FUELS (LCA
Guidelines)
CONTENTS
PART I: GENERAL
1 INTRODUCTION
2 SCOPE
PART II: METHODOLOGY
3 GENERAL APPROACH
4 WELL-TO-TANK (WtT)
5 TANK-TO-WAKE (TtW)
6 WELL-TO-WAKE (WtW)
7 SUSTAINABILITY
8 FUEL LIFECYCLE
LABEL (FLL)
PART III: DEFAULT EMISSION FACTORS AND ACTUAL VALUES
9 DEFAULT EMISSION
FACTORS
10 ACTUAL EMISSION
FACTORS
PART IV: VERIFICATION AND CERTIFICATION
11 ELEMENTS SUBJECT TO
VERIFICATION/CERTIFICATION
12 IDENTIFICATION OF
CERTIFICATION SCHEMES/STANDARDS
PART V: REVIEW
13 CONTINUOUS REVIEW
PROCESS
APPENDIX 1 FUEL LIST WITH
FUEL PATHWAY CODE
APPENDIX 2 DEFAULT
EMISSION FACTORS PER FUEL PATHWAY CODE
APPENDIX 3 ABBREVIATIONS
AND GLOSSARY
APPENDIX 4 TEMPLATE FOR
WELL-TO-TANK DEFAULT EMISSION FACTOR SUBMISSION
PART I: GENERAL
1 INTRODUCTION
1.1 These guidelines
provide guidance on life cycle GHG intensity assessment for all fuels and other
energy carriers (e.g. electricity) used on board a ship. These guidelines aim
at covering the whole fuel life cycle (with specific boundaries), from
feedstock extraction/cultivation/ recovery, feedstock conversion to a fuel
product, transportation as well as distribution/bunkering, and fuel utilization
on board a ship. These guidelines also specify sustainability themes/aspects
for marine fuels and define a Fuel Lifecycle Label (FLL), which carries
information about fuel type, feedstock (feedstock type and feedstock
nature/carbon source), conversion/production process (process type and energy
used in the process), GHG emission factors, information on fuel blends and
sustainability themes/aspects. These guidelines specify the elements of FLL
subject to verification/certification and include a general procedure on how
the certification scheme/standards could be identified.
2 SCOPE
2.1 The scope of these
guidelines is to address well-to-tank (WtT), tank-to wake (TtW), and
well-to-wake (WtW) greenhouse gases (GHG) intensity and sustainability
themes/aspects related to marine fuels/energy carriers (e.g. electricity for
shore power) used for ship propulsion and power generation onboard. The
relevant GHGs included are carbon dioxide (CO2), methane (CH4)
and nitrous oxide (N2O). These guidelines are not intended to
provide guidance for a complete IMO GHG inventory for international shipping.
Emissions from cargo (e.g. volatile organic compounds (VOC)), or use of
refrigerants are not included; other short-lived climate forcers and precursors
such as non-methane volatile organic compounds (NMVOC), sulphur oxides (SOx),
carbon monoxide (CO), particulate matter (PM) and Black Carbon are not part of
the scope of these LCA guidelines.
2.2 The system
boundaries of the WtW GHG emission factors calculation, in the context of these
guidelines span the life cycle of fuels from their sourcing to production,
conversion, transport, distribution, and eventually their use on board ships
based on an attributional approach.1 The possibility to expand the
system boundaries for specific pathways in which the feedstock is displaced
from present use(s) will be assessed on a case-by-case basis.2 As
such, emissions associated with the following life cycle stages of the fuel
life cycle chain will be accounted for:
_____________
1 Attributional Life Cycle Assessment (LCA):
LCA aiming to describe the environmentally relevant physical flows to and from
a system and its subsystems over their life cycle; Consequential Life cycle
Analysis (LCA): LCA aiming to describe how environmentally relevant flows will
change in response to possible decisions. (Finnveden G, Hauschild MZ, Ekvall T, Guinée J, Heijungs
R, Hellweg S, et al. "Recent developments in life cycle assessment".
Journal of Environmental Management. 2009;91(1):1-21).
2 Such as for captured CO2
transportation and storage.
.1 feedstock extraction/cultivation/acquisition/recovery;
.2 feedstock (early) processing/
transformation at source;
.3 feedstock transport to conversion site;
.4 feedstock conversion to product fuel;
.5 product fuel
transport/storage/delivery/retail storage/bunkering; and
.6 fuel utilization on
board a ship.
2.3 Consistently with
the attributional approach and using best available scientific evidence, the
WtT emissions calculations (i.e. emissions related to the fuel sourcing,
production, conversion, transport and delivery) are assessed regardless of the
final use of fuels/energy carriers, and the TtW emissions (i.e. emissions
related to the fuel use) are quantified regardless of the
sourcing/production/conversion/transport and delivery steps of the fuel/energy carrier.
WtW emissions are given by the sum of the two parts, providing the full
emission performance associated with the fuel production and use of a certain
fuel/energy in a specific converter onboard.
2.4 The GHG emissions
are calculated as CO2-equivalent (CO2eq), using the
Global Warming Potential over a 100-year time-horizon (GWP100) to convert
emissions of other gases than CO2, as given in the fifth IPCC
Assessment Report,3 for CO2, CH4 and N2O,
as follows:
_____________
3 The Global Warming
Potential values as given in the IPCC Fifth Assessment Report (AR5) are used in
the context of these guidelines.
• gco2eq(100y)
= GW PCO2eq(100y) · gCO2 + GW
PCH4(100y) · gCH4 + GW
PCH4(100y) · gN2O
(CO2
1; CH4 28; N2O 265), this would read as:
• gco2eq(100y) =
1 · gCO2 + 28 · gCH4 + 265 · gN2O
These GWP100 values should be used for the purpose of quantifying
the GHG intensity in accordance with these guidelines.
A calculation using a Global Warming Potential over a 20-year
horizon (GWP20) may be provided as information for comparative purposes, as
follows:
• gco2eq(20y)
= GW PCO2eq(20y) · gCO2 + GW
PCH4(20y) · gCH4 + GW
PCH4(20y) · gN2O
(CO2 1; CH4 84; N2O 264), this
would read as:
• gco2eq(20y) =
1 · gCO2 + 84 · gCH4 + 264 · gN2O
2.5 These guidelines
provide:
.1 WtW GHG emission
factors based on a life cycle attributional methodology, expressing the GHG
profile of each representative fuel using on Global Warming Potential (GWP)
values over a 100-year time-horizon of included GHG (CO2, CH4
and N2O);
.2 WtT GHG emission
factors (CO2, CH4 and N2O) quantified
consistently with the attributional approach;
.3 TtW GHG emission
factors (CO2, CH4 and N2O); and
.4 sustainability
themes/aspects for marine fuels.
2.6 These guidelines
define a FLL that carries information about fuel type, feedstock used, fuel
production pathway, GHG emission factors, information on fuel blends and
sustainability themes/aspects.
2.7 The figure below
shows a generic WtW supply chain for a fuel. The bunkering marks the last step
in the WtT phase before the TtW phase starts.

Figure 1: Generic well-to-wake supply chain
2.8 These guidelines
include an initial non-exhaustive list of fuels in appendix 1 depicting the
main current and expected future marine fuels.
PART II: METHODOLOGY
3 GENERAL APPROACH
3.1 A Life Cycle
Assessment (LCA) based approach provides a holistic assessment of the
product/service/system from well-to-wake using data specific to the activity
considered. The LCA methodology follows the marine fuel from feedstock sourcing
to its utilization onboard ships and assesses its life cycle GHG intensity.
This approach, applied within the boundaries of the WtW GHG emissions
quantification, is applicable across all geographical regions, where emissions
occur and allows for quantifying the GHG intensity over the entire fuel/energy
supply chain.
3.2 General principles
and methodology can be found in ISO 14044:2006 Environmental management —
Lifecycle assessment — Requirements and guidelines. ISO 14040:2006 Environmental
management — Lifecycle assessment — Principles and framework sets the
framework for the LCA, for the quantification of the environmental impact of
products, processes and services in the supply chain. On this basis, a specific
LCA methodology can be tailored for its application to marine fuels.
3.3 WtT emissions
represent GHG emissions resulting from growing or extracting raw materials,
producing and transporting the fuel up to the point of use, including bunkering.
3.4 TtW emissions
represent GHG emissions resulting from fuel utilization onboard (e.g.
combustion), including potential leaks (fugitive emissions and slip), when
relevant for the GHG assessment.
3.5 WtW emissions are
the sum of the WtT and TtW emissions and quantify the full life cycle GHG
emissions for a given fuel and fuel pathway, used in a given energy converter
on board.
3.6 The attributional
approach considers all processes along the supply chain of fuel/energy carrier
pathways, allowing the quantification of contributions per segment to the
overall GHG intensity of the final fuel/energy product used on board a ship.
The expansion of the system boundaries for specific pathways, in which the
feedstock or intermediate products are diverted from existing use(s), may be
considered on a case-by-case basis.
3.7 As regards the
expansion of the system boundaries, with consequential elements such as
Indirect Land Usage Change (ILUC), concerns with respect to uncertainties and
the risk of arbitrariness suggest that the feedstocks with associated ILUC
should only be assessed through a risk-based approach, in the framework of
sustainability themes/aspects, as part of these guidelines.
3.8 When more than one
product results from a conversion process, emissions related to the fuel
production should be allocated between main product and co-products. Within
such conversion processes, emissions are allocated using their energy content,
the so-called "energy allocation" approach. Where co-products allocation
cannot be performed based on their energy content (e.g. Oxygen resulting from
water electrolysis for H2 production), other methods such as mass
allocation, market revenue allocation (also known as "economic
allocation"), could be considered on a case-by-case basis.
3.9 A co-product
is defined as "an outcome of a production process, which has economic
value and elastic supply (intended as the existence of a clear evidence of the
causal link between feedstock market value and the quantity of feedstock that
can be produced)".
3.10 This definition
applies also when a raw material used to produce the fuels is a waste (no
economic value) or a residue (unavoidably produced and with negligible economic
value, needing further processing to be used in the main conversion process).
In case the feedstock is a waste, a residue or a by-product, emissions
considered as WtT start at the feedstock collection point onwards until the
point of use of the final fuel/energy product.
3.11 According to the IPCC
Guidelines for National Greenhouse Gas Inventories ("the IPCC
Guidelines"),4 any carbon in the fuel derived from biomass
should be reported as an information item and not included in the sectoral or
national totals to avoid double counting, since the net emissions from biomass
are already accounted for in the Agriculture Forestry and Other Land Use
(AFOLU) sector at a national level.
______________
4 2006 IPCC Guidelines
for National Greenhouse Gas Inventories.
3.12 The scope of the IMO
LCA guidelines does not affect or change the IPCC Guidelines. According to the
IPCC Guidelines, international waterborne navigation (international
bunkers) is grouped under "Mobile combustion" under the Energy
sector, but emissions from fuel used by ships in international transport should
not be included in national totals in national GHG inventories.
3.13 A fuel batch may be
a mix of fuels made from various feedstocks and sources (e.g. by blending 20%
biodiesel into fossil MGO) and/or through different production pathways. The
calculation should be done using the weighted averages of the energy of the
various fuel components. Relevant information should accompany each component
fuel in the FLL. Blended fuels should be included in the certification schemes
and relevant GHG default or actual emission factors (gCO2/MJ)
determined in proportion to the energy of each fuel part of the blend.
4 WELL-TO-TANK (WtT)
4.1 The pathway of each
relevant marine fuel should be clearly described and the GHG emissions during
each step of the fuel pathway should be calculated. Specific GHG emissions of a
specific non-conventional and non-fossil fuel's pathway may take into account
different characteristics across geographic regions, where feedstock production
and/or conversion occurs, as appropriate.
4.2 Any further
reference in this document to a "fuel pathway" should be understood
to include the feedstock structure (the so-called nature/carbon source and
feedstock type pair) and the production or conversion process (noting that the
same feedstock and fuel type pair can have a different production or conversion
process).
4.3 The aim of the WtT
methodology is to quantify and evaluate the GHG intensity of fuel production,
including all steps mentioned in figure 2. The carbon feedstock and production
pathway of a fuel should be identified in order to apply the methodology and is
included as part of the FLL. The production steps to be included in the WtT are
presented in figure 2.

Figure 2: Generic well-to-tank supply chain
4.4 The WtT GHG
emission factor (gCO2eq/MJ(LCV) fuel or electricity) is
calculated according to Equation (1).
Equation (1)
GHGWtT = efecu + el + ep
+ etd – esca – eccs
|
Term |
Units |
Explanation |
|
efecu |
gCO2eq / MJ(LCV) |
Emissions associated with the feedstock extraction/cultivation/acquisition/recovery
|
|
el |
gCO2eq / MJ(LCV) |
Emissions (annualized emissions (over 20 years) from carbon
stock changes caused by direct land-use change)5 |
|
ep |
gCO2eq / MJ(LCV) |
Emissions associated with the feedstock processing and/or transformation
at source and emissions associated with the conversion of the feedstock to
the final fuel product, including electricity generation |
|
etd |
gCO2eq / MJ(LCV) |
Emissions associated with the feedstock transport to conversion
plant, and the emissions associated with the finished fuel transport and
storage, local delivery, retail storage and bunkering |
|
esca |
gCO2eq / MJ(LCV) |
Emissions (annualized emission savings (over 20 years) from soil
carbon accumulation via improved agricultural management)6 |
|
eccs |
gCO2eq / MJ(LCV) |
Emissions credit from carbon capture and storage (eccs),
that have not already been accounted for in ep. This should
properly account the avoided emissions through the capture and sequestration
of emitted CO2, related to the extraction, transport, processing
and distribution of fuel (csc). From the above-mentioned emission
credit, all the emissions resulting from the process of capturing (ecc)
and transporting (et) the CO2 up to the final storage
(including the emissions related to the injection, etc.) need to be deducted.
This element should be calculated with the following formula: eccs = csc – ecc - et
-est -ex |
|
csc |
gCO2 stored / MJ(LCV) |
Emissions credit equivalent to the net CO2 captured
and stored (long-term: 100 years) |
|
ecc |
gCO2eq / MJ(LCV) |
Emissions associated with the process of capturing, compression
and/or cooling and temporary storage of the CO2 |
|
et |
gCO2eq / MJ(LCV) |
Emissions associated with transport to a long-term storage site |
|
est |
gCO2eq / MJ(LCV) |
Any emissions associated with the process of storing (longterm:
100 years) the captured CO2 (including fugitive emissions that may
happen during long-term storage and/or the injection of CO2 into
the storage) |
|
ex |
gCO2eq / MJ(LCV) |
Any additional emissions related to the CCS |
_______________
5 Pending further
methodological guidance to be developed by the Organization, the value of
parameter el should be set to zero.
6 Pending further
methodological guidance to be developed by the Organization, the value of
parameter esca should be set to zero.
4.5 The WtT emissions
in Equation (1) include emissions associated with raw materials extraction or
cultivation, primary energy sources used for production of goods and utilities
such as energy carriers (e.g. fuels and electricity), transport and
distribution (including bunkering), direct land use change and changes in
carbon stocks (soil carbon accumulation).
4.6 Processing
incorporates all steps and operations needed for the extraction, capture or
cultivation of the primary energy source. Process includes basic transformation
at source and operations needed to make the resource transportable to the
marketplace (e.g. drying, chemical/physical upgrade such as gas-to-liquid,
etc.).
4.7 Transportation,
processing and distribution include transportation of the products in the fuel
pathway to the place of transformation, conditioning (such as compression,
cooling), distribution to the marketplace (i.e. bunkering) and eventual
leakages, as well as fugitive emissions at any of these stages.
4.8 Allocation of
emissions to co-products based on their energy content should be used, as the
most appropriate and reliable methodology considering the establishment of an
appropriate certification method using values that are predictable, reproducible
and stable.
4.9 Land use (direct
and indirect) for the production of biofuels may lead to land use change (LUC).
LUC can be classified as direct LUC (DLUC) and indirect LUC (ILUC).
4.10 The DLUC definition
is based on ISO 14067:2018 described as a change in the use or management of
land within the product system being assessed. The DLUC impacts comprises the
emissions and sequestration resulting from carbon stock changes in biomass,
dead organic matter and soil organic matters, evaluated in accordance with the
IPCC Guidelines. When available, sector or country-specific data on carbon
stocks may be used; otherwise, IPCC's Tier 1 default emission factors may be
considered. Two terms in the WtT Equation (1) capture respectively emissions
resulting from direct land use change, i.e. el, and sequestration or
otherwise increase in the content of soil organic carbon: esca.
4.11 The ILUC definition
is based on ISO 14067:2018, described as a change in the use or management of
land, which is a consequence of direct land use change, but which occurs
outside the product system being assessed. ILUC occurs as a result of the
economic impacts induced by increased biofuel demand on commodity prices with
resulting shifts in demand and supply across economic sectors, including
primarily food and feed production. ILUC cannot be directly measured and is
projected with economic models instead.
4.12 Owing to the
variability of assumptions underlying the evaluation of indirect effects,
quantitative assessment of GHG effects of ILUC is subject to uncertainty, high
quantitative variability and to the risk of arbitrary conclusions. For these
reasons, ILUC should be at this stage addressed using a risk-based approach,
meaning that quantitative values will not be calculated and assigned to each
fuel pathway. The ILUC emissions, as well as the spatial dimension of the ILUC
effects, are dependent on a variety of factors such as local/regional
conditions and practices for agriculture, current and expected food import
demand, national current accounts, the type of feedstock, the alternative
economic uses of the same feedstock, etc.
4.13 A qualitative
risk-based approach to ILUC includes consideration on the following:
.1 Low-ILUC risk
qualifies and characterizes biofuel production projects that supply additional
feedstock without disrupting existing land uses. When productivity is increased
on an area which is in agricultural production, only additional yields should
be considered as low-ILUC rather than the entire production; and
.2 High-ILUC risk
qualifies and characterizes biofuel production projects based on, or
displacing, food and feed crops resulting in a significant expansion of the
feedstock production area shifting into land with high-carbon stock.
4.14 WtT default emission
factors are provided in appendix 2 of these guidelines.
5 TANK-TO-WAKE (TtW)
5.1 The aim of the TtW
methodology is to quantify and evaluate the intensity of CO2, CH4
and N2O emitted on board a ship related to the fuel usage, including
combustion/conversion and all relevant fugitive emissions with a Global Warming
Potential.
5.2 The TtW GHG
emission factors should be calculated using Equation (2):
Equation (2)

Note: terms SFccu, eccu
and eoccs are pending further methodological guidance to be
developed by the Organization. For more details refer to footnotes 11 to 13.
|
Term |
Units |
Explanation |
|
Cslip_ship |
% of total fuel mass |
Factor accounting for fuel (expressed in % of total fuel mass
delivered to the ship) which escapes from the energy converter without being
oxidized (including fuel that escapes from combustion chamber/oxidation
process and from crankcase, as appropriate) Cslip_ship = Cslip *
(1 – Cfug /100) |
|
Cslip |
% of total fuel mass |
Factor accounting for fuel (expressed in % of total fuel mass
consumed in the energy converter) which escapes from the energy converter
without being oxidized (including fuel that escapes from combustion
chamber/oxidation process and from crankcase, as appropriate) |
|
Cfug |
% of fuel mass |
Factor accounting for the fuel (expressed in % of mass of the
fuel delivered to the ship) which escapes between the tanks up to the energy
converter which is leaked, vented or otherwise lost in the system7 |
|
Csfx |
gGHG/g fuel |
Factor accounting for the share of GHG in the components of the
fuel (expressed in g GHG/g fuel) Example: for LNG this value is 1 |
|
CfCO2 |
gCO2/g fuel |
CO2 emission conversion factor (gCO2/g
fuel completely combusted) for emissions of the combustion and/or oxidation
process of the fuel used by the ship |
|
CfCH4 |
gCH4/g fuel |
CH4 emission conversion factor (gCH4/g
fuel delivered to the ship) for emissions of the combustion and/or oxidation
process of the fuel used by the ship8 |
|
CfN2O |
gN2O/g fuel |
N2O emission conversion factor (gN2O/g
fuel delivered to the ship) for emissions of the combustion and/or oxidation
process of the fuel used by the ship |
|
GWPCH4 |
gCO2eq/g CH4 |
Global Warming Potential of CH4 over 100 years (based
on the fifth IPCC Assessment Report 5)9 Definition as per https://www.ipcc.ch/assessmentreport/ar5/ |