RESOLUTION MEPC.352(78)
(adopted on 10 June 2022)
2022 GUIDELINES ON OPERATIONAL CARBON INTENSITY INDICATORS AND THE
CALCULATION METHODS (CII GUIDELINES, G1)
THE MARINE ENVIRONMENT PROTECTION COMMITTEE,
RECALLING Article 38(a) of the Convention on the International
Maritime Organization concerning the functions of the Marine Environment
Protection Committee, the Committee, conferred upon it by international
conventions for the prevention and control of marine pollution from ships,
NOTING that the Committee adopted, at its seventy-sixth session,
by resolution MEPC.328(76),
the 2021 Revised MARPOL Annex VI, which will enter into force on 1
November 2022,
NOTING IN PARTICULAR that the 2021 Revised MARPOL Annex VI
(MARPOL Annex VI) contains amendments concerning mandatory goal-based technical
and operational measures to reduce carbon intensity of international shipping,
NOTING FURTHER that regulation 28.1 of MARPOL Annex VI requires
ships to which this regulation apply to calculate the attained annual
operational CII taking into account the guidelines developed by the
Organization,
RECOGNIZING that the aforementioned amendments to MARPOL Annex VI
require relevant guidelines for uniform and effective implementation of the
regulations and to provide sufficient lead time for industry to prepare,
NOTING that the Committee, at its seventy-sixth session, adopted,
by resolution MEPC.336(76),
the 2021 Guidelines on operational carbon intensity indicators and the
calculation methods (CII Guidelines, G1),
HAVING CONSIDERED, at its seventy-eighth session, the draft 2022
Guidelines on operational carbon intensity indicators and the calculation
methods (CII Guidelines, G1),
1 ADOPTS the 2022
Guidelines on operational carbon intensity indicators and the calculation
methods (CII Guidelines, G1), as set out in the annex to the present
resolution;
2 INVITES
Administrations to take the annexed Guidelines into account when developing and
enacting national laws which give force to and implement requirements set forth
in regulation 28.1 of MARPOL Annex VI;
3 REQUESTS the
Parties to MARPOL Annex VI and other Member Governments to bring the annexed
Guidelines to the attention of masters, seafarers, shipowners, ship operators
and any other interested parties;
4 AGREES to keep the
Guidelines under review in light of experience gained with their
implementation, also taking into consideration that in accordance with
regulation 28.11 of MARPOL Annex VI a review of the operational measure to
reduce carbon intensity of international shipping shall be completed by 1
January 2026,
5 REVOKES the 2021
Guidelines on operational carbon intensity indicators and the calculation
methods (CII Guidelines, G1) adopted by resolution MEPC.336(76).
ANNEX
2022 GUIDELINES ON OPERATIONAL CARBON INTENSITY INDICATORS AND THE
CALCULATION METHODS (CII GUIDELINES, G1)
1 Introduction
1.1 In the Initial
IMO Strategy on Reduction of GHG Emissions from Ships (Resolution MEPC.304(72)),
the level of ambition on carbon intensity of international shipping is
quantified by the CO2 emissions per transport work, as an average
across international shipping.
1.2 These Guidelines
address the calculation methods and the applicability of the operational carbon
intensity indicator (CII) for individual ships to which chapter 4 of MARPOL
Annex VI, as amended, applies.
2 Definitions
2.1 MARPOL means
the International Convention for the Prevention of Pollution from Ships, 1973,
as modified by the Protocols of 1978 and 1997 relating thereto, as amended.
2.2 IMO DCS
means the data collection system for fuel oil consumption of ships referred to
in regulation 27 and related provisions of MARPOL Annex VI.
2.3 For the purpose of
these Guidelines, the definitions in MARPOL Annex VI, as amended, apply.
2.4 The metrics
indicating the average CO2 emissions per transport work of a ship
are generally referred to as operational carbon intensity indicator (CII) in
these Guidelines.
.1 A specific CII calculated based on the
actual or estimated mass or volume of the shipment carried on board a ship is
generally referred to as demand-based CII; and
.2 A specific CII, in which calculation the
capacity of a ship is taken as proxy of the actual mass or volume of the
shipment carried on board, is generally referred to as supply-based CII.
2.5 The supply-based
CII which uses DWT as the capacity is referred to as AER, and the
supply-based CII which uses GT as the capacity is referred to as cgDIST.
3 Application
3.1 For all ships to
which regulation 28 of MARPOL Annex VI applies, the operational carbon
intensity indicators defined in section 4 should be applied.
3.2 The operational
carbon intensity indicators defined in section 5 are encouraged to be
additionally used by ships, where applicable, for trial purposes.
4 Operational carbon
intensity indicator (CII) of individual ships for use in implementing
regulation 28 of MARPOL Annex VI
In its most simple form, the attained annual operational CII of
individual ships is calculated as the ratio of the total mass of CO2
(M) emitted to the total transport work (W) undertaken in a given
calendar year, as follows:
attained CIIship = M / W (1)
4.1 Mass of CO2
emissions (M)
The total mass of CO2 is the sum of CO2
emissions (in grams) from all the fuel oil consumed on board a ship in a given
calendar year, as follows:
M =
FCj · CFj (2)
where:
- j is
the fuel oil type;
- FCj is
the total mass (in grams) of consumed fuel oil of type j in the calendar
year, as reported under IMO DCS; and
- CFj represents
the fuel oil mass to CO2 mass conversion factor for fuel oil type
j, in
line with those specified in the 2018 Guidelines on the method of
calculation of the attained Energy Efficiency Design Index (EEDI) for new ships
(resolution MEPC.308(73)),
as may be further amended. In case the type of the fuel oil is not covered by
the guidelines, the conversion factor should be obtained from the fuel oil
supplier supported by documentary evidence.
4.2 Transport work (W)
In the absence of the data on actual transport work, the
supply-based transport work (Ws) can be taken as a proxy,
which is defined as the product of a ship's capacity and the distance travelled
in a given calendar year, as follows:
Ws = C · Dt
(3)
where:
- C represents the ship's capacity:
- For
bulk carriers, tankers, container ships, gas carriers, LNG carriers, general
cargo ships, refrigerated cargo carrier and combination carriers, deadweight
tonnage (DWT)1 should be used as Capacity;
- For
cruise passenger ships, ro-ro cargo ships (vehicle carriers), ro-ro cargo ships
and ro-ro passenger ships, gross tonnage (GT)2 should be used as
Capacity; and
- Dt
represents the total distance travelled (in nautical miles), as reported under
IMO DCS.