Revoked by MEPC.352(78)
RESOLUTION MEPC.336(76)
(adopted on 17 June 2021)
2021
GUIDELINES ON OPERATIONAL CARBON INTENSITY INDICATORS AND THE CALCULATION
METHODS (CII GUIDELINES, G1)
THE MARINE ENVIRONMENT PROTECTION COMMITTEE,
RECALLING Article 38(a) of the Convention on the International
Maritime Organization concerning the functions of the Marine Environment
Protection Committee conferred upon it by international conventions for the
prevention and control of marine pollution from ships,
NOTING that it adopted, by resolution MEPC.328(76), the 2021 revised MARPOL Annex
VI, which is expected to enter into force on 1 November 2022 upon its deemed
acceptance on 1 May 2022,
NOTING IN PARTICULAR that the 2021 revised MARPOL Annex VI
contains amendments concerning mandatory goal-based technical and operational
measures to reduce carbon intensity of international shipping,
NOTING FURTHER that regulation 28.1 of MARPOL Annex VI requires
ships to which this regulation apply to calculate the attained annual
operational CII taking into account the guidelines developed by the
Organization,
RECOGNIZING that the aforementioned amendments to MARPOL Annex VI
require relevant guidelines for uniform and effective implementation of the
regulations and to provide sufficient lead time for industry to prepare,
HAVING CONSIDERED, at its seventy-sixth session, draft 2021
Guidelines on operational carbon intensity indicators and the calculation methods
(CII Guidelines, G1),
1 ADOPTS the 2021
Guidelines on operational carbon intensity indicators and the calculation
methods (CII Guidelines, G1), as set out in the annex to the present
resolution;
2 INVITES
Administrations to take the annexed Guidelines into account when developing and
enacting national laws which give force to and implement requirements set forth
in regulation 28.1 of MARPOL Annex VI;
3 REQUESTS the
Parties to MARPOL Annex VI and other Member Governments to bring the annexed Guidelines
to the attention of masters, seafarers, shipowners, ship operators and any
other interested parties;
4 AGREES to consider
substantiated proposals for CII correction factors for certain ship types,
operational profiles and/or voyages with a view to enhancing, as appropriate,
the annexed Guidelines before entry into force of the aforementioned amendments
to MARPOL Annex VI;
5 AGREES to keep the
Guidelines under review in light of experience gained with their implementation
and in light of the review of CII regulations to be completed by the
Organization by 1 January 2026 as identified in regulation 28.11 of MARPOL
Annex VI.
ANNEX
2021
GUIDELINES ON OPERATIONAL CARBON INTENSITY INDICATORS AND THE CALCULATION
METHODS (CII GUIDELINES, G1)
1 Introduction
1.1 In the Initial
IMO Strategy on Reduction of GHG Emissions from Ships (Resolution MEPC.304(72)),
the level of ambition on carbon intensity of international shipping is
quantified by the CO2 emissions per transport work, as an average
across international shipping.
1.2 These Guidelines
address the calculation methods and the applicability of the operational carbon
intensity indicator (CII) for individual ships to which chapter 4 of MARPOL
Annex VI, as amended, applies.
2 Definitions
2.1 MARPOL means
the International Convention for the Prevention of Pollution from Ships, 1973,
as modified by the Protocols of 1978 and 1997 relating thereto, as amended.
2.2 IMO DCS
means the data collection system for fuel oil consumption of ships referred to
in regulation 27 and related provisions of MARPOL Annex VI.
2.3 For the purpose of
these Guidelines, the definitions in MARPOL Annex VI, as amended, apply.
2.4 The metrics
indicating the average CO2 emissions per transport work of a ship
are generally referred to as operational carbon intensity indicator (CII) in
these Guidelines.
.1 A specific CII
calculated based on the actual or estimated mass or volume of the shipment
carried on board a ship is generally referred to as demand-based CII;
and
.2 A specific CII, in
which calculation the capacity of a ship is taken as proxy of the actual mass
or volume of the shipment carried on board, is generally referred to as supply-based
CII.
2.5 The supply-based
CII which uses DWT as the capacity is referred to as AER, and the
supply-based CII which uses GT as the capacity is referred to as cgDIST.
3 Application
3.1 For all ships to
which regulation 28 of MARPOL Annex VI applies, the operational carbon
intensity indicators defined in section 4 should be applied.
3.2 The operational
carbon intensity indicators defined in section 5 are encouraged to be
additionally used by ships, where applicable, for trial purposes.
4 Operational carbon
intensity indicator (CII) of individual ships for use in implementing
regulation 28 of MARPOL Annex VI
In its most simple form, the attained annual operational CII of
individual ships is calculated as the ratio of the total mass of CO2
(M) emitted to the total transport work (W) undertaken in a given
calendar year, as follows:
attained
CII ship = M / W (1)
4.1 Mass of CO2
emissions (M)
The total mass of CO2 is the sum of CO2
emissions (in grams) from all the fuel oil consumed on board a ship in a given
calendar year, as follows:
M =
FCJ · CFj (2)
where:
- j is the fuel oil type;
- FCj is the total mass (in
grams) of consumed fuel oil of type j in the calendar year, as reported
under IMO DCS; and
- CFj represents the fuel oil mass
to CO2 mass conversion factor for fuel oil type
j, in
line with those specified in the 2018 Guidelines on the method of
calculation of the attained Energy Efficiency Design Index (EEDI) for new ships
(resolution MEPC.308(73)),
as may be further amended. In case the type of the fuel oil is not covered by
the guidelines, the conversion factor should be obtained from the fuel oil
supplier supported by documentary evidence.
4.2 Transport work (W)
In the absence of the data on actual transport work, the
supply-based transport work (Ws) can be taken as a proxy,
which is defined as the product of a shipʹs capacity and the distance
travelled in a given calendar year, as follows:
Ws
= C · Dt (3)
where:
- C represents the shipʹs
capacity:
- For bulk carriers, tankers, container ships,
gas carriers, LNG carriers, ro-ro cargo ships, general cargo ships,
refrigerated cargo carrier and combination carriers, deadweight tonnage (DWT)1
should be used as Capacity;
- For cruise passenger ships, ro-ro cargo ships
(vehicle carriers) and ro-ro passenger ships, gross tonnage (GT)2
should be used as Capacity; and
- Dt
represents the total distance travelled (in nautical miles), as reported under
IMO DCS.