RESOLUTION MSC.99(73)
(adopted on 5 December 2000)
ADOPTION OF AMENDMENTS TO
THE INTERNATIONAL CONVENTION
FOR THE SAFETY OF LIFE AT
SEA, 1974, AS AMENDED
THE MARITIME SAFETY COMMITTEE,
RECALLING Article 28(b) of the Convention on the International
Maritime Organization concerning the functions of the Committee,
RECALLING FURTHER article VIII(b) of the International Convention
for the Safety of Life at Sea (SOLAS),
1974, hereinafter referred to as "the Convention", concerning the
procedures for amending the Annex to the Convention, other than the provisions
of chapter I thereof,
HAVING CONSIDERED, at its seventy-third session, amendments to the
Convention proposed and circulated in accordance with article VIII(b)(i) thereof,
1. ADOPTS, in
accordance with article VIII(b)(iv) of the Convention, amendments to the
Convention, the text of which is set out in the Annex to the present
resolution;
2. DETERMINES, in
accordance with article VIII(b)(vi)(2)(bb) of the Convention, that the
amendments shall be deemed to have been accepted on 1 January 2002, unless, prior to that date, more than one
third of the Contracting Governments to the Convention or Contracting
Governments the combined merchant fleets of which constitute not less than 50% of the gross tonnage of the world´s
merchant fleet, have notified their objections to the amendments;
3. INVITES
Contracting Governments to note that, in accordance with article
VIII(b)(vii)(2) of the Convention, the
amendments shall enter into force on 1 July 2002 upon their acceptance in
accordance with paragraph 2 above;
4. REQUESTS the Secretary-General,
in conformity
with article VIII(b)(v) of the Convention, to transmit certified copies of the
present resolution and the text of the
amendments contained in the Annex to all Contracting Governments to the
Convention;
5. FURTHER REQUESTS the Secretary-General
to transmit copies of this resolution
and its Annex to Members of the Organization, which are not Contracting
Governments to the Convention.
ANNEX
AMENDMENTS TO THE
INTERNATIONAL CONVENTION FOR THE
SAFETY OF LIFE AT SEA, 1974,
AS AMENDED
CHAPTER II-1
CONSTRUCTION – STRUCTURE,
SUBDIVISION AND STABILITY,
MACHINERY AND ELECTRICAL
INSTALLATIONS
Regulation 3-4 – Emergency towing arrangements on tankers
1 The existing text
of the regulation is replaced by the following:
"Regulation 3-4
Emergency towing
arrangements on tankers
1 Emergency towing
arrangements shall be fitted at both ends on board every tanker of not less
than 20,000 tonnes deadweight.
2 For tankers
constructed on or after 1 July 2002:
.1 the arrangements shall, at all times, be
capable of rapid deployment in the absence of main power on the ship to be
towed and easy connection to the towing ship. At least one of the emergency
towing arrangements shall be pre-rigged ready for rapid deployment; and
.2 emergency towing arrangements at both
ends shall be of adequate strength taking into account the size and deadweight
of the ship, and the expected forces during bad weather conditions. The design and construction and prototype
testing of emergency towing arrangements shall be approved by the Administration, based on the Guidelines
developed by the Organization.
3 For tankers constructed before 1 July
2002, the design and construction of emergency towing arrangements shall be
approved by the Administration, based on the Guidelines developed by the
Organization.*
__________
* Refer to
the Guidelines on emergency towing arrangements for tankers adopted by the
Maritime Safety Committee by resolution MSC.35(63), as may be amended."
2 The following new
regulation 3-5 is inserted after existing regulation 3-4:
"Regulation 3-5
New installation of
materials containing asbestos
1 This regulation shall
apply to materials used for the structure, machinery, electrical installations
and equipment covered by the present Convention.
2 For all ships, new
installation of materials which contain asbestos shall be prohibited except
for:
.1 vanes used in rotary vane compressors
and rotary vane vacuum pumps;
.2 watertight joints and linings used for
the circulation of fluids when, at high temperature (in excess of 350°C) or
pressure (in excess of 7 x 106 Pa), there is a risk of fire,
corrosion or toxicity; and
.3 supple and flexible thermal insulation
assemblies used for temperatures above 1000°C.”
Regulation 43 – Emergency source of electrical power in cargo
ships
3 In paragraph
2.2.5, the word “and” is deleted.
4 In paragraph
2.2.6, the word “motors.” is replaced by the words “motors; and”.
5 In paragraph 2.2,
the following new subparagraph .7 is added after existing subparagraph .6:
“.7 in all cargo pump-rooms of tankers
constructed on or after 1 July 2002".
CHAPTER II-2
CONSTRUCTION – FIRE PROTECTION,
FIRE DETECTION AND
FIRE EXTINCTION
6 The existing text
of chapter II-2 is replaced by the following:
“PART A - GENERAL
Regulation 1
Application
1 Application
1.1 Unless expressly
provided otherwise, this chapter shall apply to ships constructed on or after 1
July 2002.
1.2 For the purpose of
this chapter:
.1 the
expression ships constructed means ships the keels of which are laid or which
are at a similar stage of construction;
.2 the
expression all ships means ships, irrespective of type, constructed before, on
or after 1 July 2002; and
.3
a cargo ship, whenever built,
which is converted to a passenger ship shall be treated as a passenger ship
constructed on the date on which such a conversion commences.
1.3 For the purpose of
this chapter, the expression a similar stage of construction means the
stage at which:
.1 construction
identifiable with a specific ship begins; and
.2 assembly
of that ship has commenced comprising at least 50 tonnes or one per cent of the
estimated mass of all structural material, whichever is less.
2 Applicable
requirements to existing ships
2.1 Unless expressly
provided otherwise, for ships constructed before 1 July 2002 the Administration
shall ensure that the requirements which are applicable under chapter II-2 of
the International Convention for the Safety of Life at Sea, 1974, as amended by
resolutions MSC.1(XLV),
MSC.6(48), MSC.13(57), MSC.22(59), MSC.24(60), MSC.27(61), MSC.31(63) and MSC.57(67), are
complied with.
2.2 Ships constructed
before 1 July 2002 shall also comply with:
.1
paragraphs 3, 6.5 and 6.7 as
appropriate;
.2
regulations 13.3.4.2 to 13.3.4.5,
13.4.3 and Part E, except regulations 16.3.2.2 and 16.3.2.3 thereof, as
appropriate, not later than the date of the first survey after 1 July 2002;
.3
regulations 10.4.1.3 and 10.6.4
for new installations only; and
.4
regulation 10.5.6 not later than 1
October 2005 for passenger ships of 2,000 gross tonnage and above.
3 Repairs,
alterations, modifications and outfitting
3.1 All ships which
undergo repairs, alterations, modifications and outfitting related thereto
shall continue to comply with at least the requirements previously applicable
to these ships. Such ships, if
constructed before 1 July 2002, shall, as a rule, comply with the requirements
for ships constructed on or after that date to at least the same extent as they
did before undergoing such repairs, alterations, modifications or
outfitting.
3.2 Repairs,
alterations and modifications which substantially alter the dimensions of a
ship or the passenger accommodation spaces, or substantially increase a ship's
service life and outfitting related thereto shall meet the requirements for
ships constructed on or after 1 July 2002 in so far as the Administration deems
reasonable and practicable.
4 Exemptions
4.1 The Administration
may, if it considers that the sheltered nature and conditions of the voyage are
such as to render the application of any specific requirements of this chapter
unreasonable or unnecessary, exempt* from those requirements individual ships
or classes of ships entitled to fly the flag of its State, provided that such
ships, which, in the course of their voyage, do not sail at distances of more
than 20 miles from the nearest land.
__________________
* Refer to port State
concurrence with SOLAS
exemptions (MSC/Circ.606).
4.2 In the case of
passenger ships which are employed in special trades for the carriage of large
numbers of special trade passengers, such as the pilgrim trade, the
Administration, if satisfied that it is impracticable to enforce compliance
with the requirements of this chapter, may exempt such ships from those
requirements, provided that they comply fully with the provisions of:
.1 the rules annexed
to the Special Trade Passenger Ships Agreement, 1971; and
.2 the rules annexed
to the Protocol on Space Requirements for Special Trade Passenger Ships, 1973.
5 Applicable
requirements depending on ship type
Unless expressly provided otherwise:
.1 requirements not
referring to a specific ship type shall apply to ships of all types; and
.2 requirements
referring to "tankers" shall apply to tankers subject to the
requirements specified in paragraph 6 below.
6 Application of
requirements for tankers
6.1 Requirements for
tankers in this chapter shall apply to tankers carrying crude oil or petroleum
products having a flashpoint not exceeding 60oC (closed cup test),
as determined by an approved flashpoint apparatus, and a Reid vapour pressure
which is below the atmospheric pressure or other liquid products having a
similar fire hazard.
6.2 Where liquid cargoes other than those referred to in paragraph
6.1 or liquefied gases which introduce additional fire hazards are intended to
be carried, additional safety measures shall be required, having due regard to
the provisions of the International Bulk Chemical Code, as defined in
regulation VII/8.1, the Bulk Chemical Code, the International Gas Carrier Code,
as defined in regulation VII/11.1, and the Gas Carrier Code, as
appropriate.
6.2.1 A liquid cargo with
a flashpoint of less than 60°C for which a regular foam firefighting system
complying with the Fire Safety Systems Code is not effective, is considered to
be a cargo introducing additional fire hazards in this context. The following additional measures are
required:
.1 the
foam shall be of alcohol resistant type;
.2 the type of foam
concentrates for use in chemical tankers shall be to the satisfaction of the
Administration taking into account the guidelines developed by the
Organization;* and
_____________________
* Refer to the Guidelines for performance and
testing criteria and surveys of expansion foam concentrates for
fire-extinguishing systems for chemical tankers (MSC/Circ.799).
.3 the capacity and
application rates of the foam extinguishing system shall comply with chapter 11
of the International Bulk Chemical Code, except that lower application rates
may be accepted based on performance tests.
For tankers fitted with inert gas systems, a quantity of foam
concentrate sufficient for 20 min of foam
generation may be accepted.**
_____________________
** Refer to the Information on flashpoint and
recommended fire-fighting media for chemicals to which neither the IBC nor BCH
Codes apply (MSC/Circ.553).
6.2.2 For the purpose of
this regulation, a liquid cargo with a vapour pressure greater than 1.013 bar
absolute at 37.8°C is considered to be a cargo introducing additional fire
hazards. Ships carrying such substances
shall comply with paragraph 15.14 of the International Bulk Chemical Code. When ships operate in restricted areas and at
restricted times, the Administration concerned may agree to waive the
requirements for refrigeration systems in accordance with paragraph 15.14.3 of
the International Bulk Chemical Code.
6.3 Liquid cargoes with
a flashpoint exceeding 60°C other than oil products or liquid cargoes subject
to the requirements of the International Bulk Chemical Code are considered to
constitute a low fire risk, not requiring the protection of a fixed foam
extinguishing system.
6.4 Tankers carrying petroleum products with
a flashpoint exceeding 60oC (closed cup test), as determined by an
approved flashpoint apparatus, shall comply with the requirements provided in
regulations 10.2.1.4.4. and 10.10.2.3 and the requirements for cargo ships
other than tankers, except that, in lieu of the fixed fire extinguishing system
required in regulation 10.7, they shall be fitted with a fixed deck foam system
which shall comply with the provisions of
the Fire Safety Systems Code.
6.5 Combination
carriers constructed before, on or after 1 July 2002 shall not carry cargoes
other than oil unless all cargo spaces are empty of oil and gas-freed or unless
the arrangements provided in each case have been be approved by the
Administration taking into account the guidelines developed by the
Organization.*
____________________
* Refer to the Guidelines
for inert gas systems (MSC/Circ.353),
as amended by MSC/Circ.387.
6.6 Chemical tankers
and gas carriers shall comply with the requirements for tankers, except where
alternative and supplementary arrangements are provided to the satisfaction of
the Administration, having due regard to the provisions of the International
Bulk Chemical Code and the International Gas Carrier Code, as appropriate.
6.7 The requirements of
regulations 4.5.10.1.1 and 4.5.10.1.4, and a system for continuous monitoring
of the concentration of hydrocarbon gases shall be fitted on all tankers
constructed before 1 July 2002 by the date of the first scheduled dry-docking
after 1 July 2002, but not later than 1 July 2005. Sampling points or detector heads shall be
located in suitable positions in order that potentially dangerous leakages are
readily detected. When the hydrocarbon
gas concentration reaches a pre-set level which shall not be higher than 10% of
the lower flammable limit, a continuous audible and visual alarm signal shall
be automatically effected in the pump-room and cargo control room to alert
personnel to the potential hazard.
However, existing monitoring systems already fitted having a pre-set
level not greater than 30% of the lower flammable limit may be accepted.
Regulation 2
Fire safety objectives and
functional requirements
1 Fire safety
objectives
1.1 The
fire safety objectives of this chapter are to:
.1 prevent
the occurrence of fire and explosion;
.2 reduce
the risk to life caused by fire;
.3 reduce the risk of
damage caused by fire to the ship, its cargo and the environment;
.4 contain, control
and suppress fire and explosion in the compartment of origin; and
.5 provide adequate
and readily accessible means of escape for passengers and crew.
2 Functional
requirements
2.1 In order to achieve
the fire safety objectives set out in paragraph 1 above, the following
functional requirements are embodied in the regulations of this chapter as
appropriate:
.1 division
of the ship into main vertical and horizontal zones by thermal and structural
boundaries;
.2 separation
of accommodation spaces from the remainder of the ship by thermal and
structural boundaries;
.3 restricted
use of combustible materials;
.4 detection
of any fire in the zone of origin;
.5 containment
and extinction of any fire in the space of origin;
.6 protection
of means of escape and access for fire-fighting;
.7 ready
availability of fire-extinguishing appliances; and
.8 minimization
of possibility of ignition of flammable cargo vapour.
3 Achievement of the
fire safety objectives
The fire safety objectives set out in paragraph 1 above shall be
achieved by ensuring compliance with the prescriptive requirements specified in
parts B, C, D, E or G, or by alternative design and arrangements which comply
with Part F. A ship shall be considered
to meet the functional requirements set out in paragraph 2 and to achieve the
fire safety objectives set out in paragraph 1 when either:
.1 the ship’s designs and arrangements, as
a whole, complies with the relevant prescriptive requirements in parts B, C, D,
E or G;
.2 the ship’s designs and arrangements, as
a whole, have been reviewed and approved in accordance with part F; or
.3 part(s) of the ship’s designs and
arrangements have been reviewed and approved in accordance with part F and the
remaining parts of the ship comply with the relevant prescriptive requirements
in parts B, C, D, E or G.
Regulation 3
Definitions
For the purpose of this chapter, unless expressly provided
otherwise, the following definitions shall apply:
1 Accommodation
spaces are those spaces used for public spaces, corridors, lavatories,
cabins, offices, hospitals, cinemas, game and hobby rooms, barber shops,
pantries containing no cooking appliances and similar spaces;
2 "A"
class divisions are those divisions formed by bulkheads and decks which
comply with the following criteria:
.1 they
are constructed of steel or other equivalent material;
.2 they
are suitably stiffened;
.3 they are insulated with approved
non-combustible materials such that the average temperature of the unexposed
side will not rise more than 140°C above the original temperature, nor will the
temperature, at any one point, including any joint, rise more than 180°C above
the original temperature, within the time listed below:
class "A-60" 60
min
class "A-30" 30
min
class "A-15" 15
min
class "A-0" 0 min
.4 they
are constructed as to be capable of preventing the passage of smoke and flame
to the end of the one-hour standard fire test; and
.5 the
Administration has required a test of a prototype bulkhead or deck in
accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and
temperature rise.
3 Atriums are
public spaces within a single main vertical zone spanning three or more open
decks.
4 "B"
class divisions are those divisions formed by bulkheads, decks, ceilings or
linings which comply with the following criteria:
.1 they are constructed of approved
non-combustible materials and all materials used in the construction and
erection of "B" class divisions are non-combustible, with the
exception that combustible veneers may be permitted provided they meet other
appropriate requirements of this chapter;
.2 they have an insulation value such that
the average temperature of the unexposed side will not rise more than 140°C
above the original temperature, nor will the temperature at any one point,
including any joint, rise more than 225°C above the original temperature,
within the time listed below:
class "B-15" 15
min
class "B-0" 0 min
.3 they are constructed as to be capable of
preventing the passage of flame to the end of the first half hour of the
standard fire test; and
.4 the Administration has required a test
of a prototype division in accordance with the Fire Test Procedures Code to
ensure that it meets the above requirements for integrity and temperature rise.
5 Bulkhead deck
is the uppermost deck up to which the transverse watertight bulkheads are
carried.
6 Cargo area
is that part of the ship that contains cargo holds, cargo tanks, slop tanks and
cargo pump-rooms including pump-rooms, cofferdams, ballast and void spaces
adjacent to cargo tanks and also deck areas throughout the entire length and
breadth of the part of the ship over the above-mentioned spaces.
7 Cargo ship
is a ship as defined in regulation I/2(g).
8 Cargo spaces
are spaces used for cargo, cargo oil tanks, tanks for other liquid cargo and
trunks to such spaces.
9 Central control
station is a control station in which the following control and indicator
functions are centralized:
.1 fixed
fire detection and fire alarm systems;
.2
automatic sprinkler, fire
detection and fire alarm systems;
.3
fire door indicator panels;
.4
fire door closure;
.5
watertight door indicator panels;
.6
watertight door closures;
.7
ventilation fans;
.8
general/fire alarms;
.9
communication systems including
telephones; and
.10
microphones to public address
systems.
10 "C"
class divisions are divisions constructed of approved non-combustible
materials. They need meet neither
requirements relative to the passage of smoke and flame nor limitations
relative to the temperature rise.
Combustible veneers are permitted provided they meet the requirements of
this chapter.
11 Chemical tanker
is a cargo ship constructed or adapted and used for the carriage in bulk of any
liquid product of a flammable nature listed in chapter 17 of the International
Bulk Chemical Code, as defined in regulation VII/8.1.
12 Closed ro-ro
spaces are ro-ro spaces which are neither open ro-ro spaces nor weather decks.
13 Closed vehicle
spaces are vehicle spaces which are neither open vehicle spaces nor weather
decks.
14 Combination
carrier is a cargo ship designed to carry both oil and solid cargoes in
bulk.